These fans are designed to operate quietly
and efficiently exhausting stale air, smoke or fumes and pulling clean, fresh
air in from the outdoors. These fans exhaust heat and humidity from attics,
basements, closets, storage rooms and many other areas. This industrial
duty fan allows for many configurations of mounting in window, between beams
or wall. The self-contained built-in OSHA approved steel and rust resistant coated
safety guard comes already mounted allowing for easy installation.
OSHA requires safety guards on fans mounted in reach or within
7 feet or lower from the floor. These fans have the safety guards built in
allowing for mounting at lower levels. This saves you money! No need for extra
safety guards.
See Explosion proof Exhaust Fans
|
8" fan blade shown. Self contained for easy installation. |
8"
Exhaust Fan Size 10"H x 10"W x 7"D Wt.7
lbs. Also available MOUNTED on AUTOMATIC
SHUTTER |
|
8" fan blade shown. Excellent for removal of smoke and heat. Helps reduce humidity that causes mildew. |
Reversible
Exhaust Fan 10"5-wing Aluminum fan
blade |
| Price includes
Safety Guard & Shutter Shutter is attached to Guard. Complete & Ready
for Easy Installation. |
Sealed Motor 8" Blade 10" Blade |
|
Excellent for removal of smoke and heat. Helps reduce humidity that causes mildew. |
12"
Exhaust Fan Also available MOUNTED on AUTOMATIC
SHUTTER |
| 12" Exhaust Fan Excellent for removal of smoke and heat. Helps reduce humidity that causes mildew. |
CFM* 1,100 Also available MOUNTED on AUTOMATIC
SHUTTER CFM* 1,500 Also available MOUNTED on AUTOMATIC
SHUTTER |
| for - Industrial
& Commercial applications |
CFM*
1,500 Volts 115 AC Rust Proof Heavy Gauge Aluminum panel Fan Blade 12" diameter Aluminum Pre-Drilled Mounting Holes The Famous Brand Motor Motor HP 1/12 industrial duty RPM 1650 60 Hz 115 Volt AC Bearing Sealed Ball , Continuous duty, Capacitor start for high torque starting OSHA approved safety guard Size 16"H x 31-3/4"W x 9"D Wt.13 lbs. |
 Fasco Motor |
Exhaust
Fan w/Safety Guard &
Shutter |
|
Complete & Ready for Easy Installation. Excellent for reduction of heat and humidity. Perfect as an attic fan or whole house fan. 18" shown For vertical installation only. |
Exhaust Fan w/Safety
Guard & Shutter 20"4-wing
Heavy Gauge Aluminum fan blade CFM* 4,200 |
| Super
Quite Powerhouse Applications: Grain Elevators, Barns, Poultry, Factory, Warehouse, Transformer Cooling, hi dust / grease areas |
24"
Exhaust Fan Size 32"H x 32"W x 16"D Wt.
71 lbs. |
*CFM (Cubic Feet of Air per Minute)
will vary due to temperature, humidity and viscosity of the air.
Caution: OSHA requires safety guards
on fans mounted in reach or within 7 feet or lower from the floor. Consult
the Occupational Safety & Health Administration codes.
Automatic
shutters available click here
Special
Application Exhaust Fans