CHEMICAL APPLICATION:
Magnetically driven pumps for semi-corrosive chemicals and solutions. The MD-SC Series features leak proof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polypropylene, ceramic and Buna-n® parts. Thermally protected open fan-cooled motor with sleeve bearings. 6 ft. power cord and 3-prong molded plug.

UTLILITY GENERAL APPLICATION:
Non-submersible, Self-Priming Water-Transfer Pump
This lightweight, portable pump, with self-priming action can be used to empty waterbeds, drain water heaters or aquariums, pump out a basement, transfer water to an RV, pump boat bilges, pump out stock tanks, and in just about any other application where water needs to be transferred.

Model 2MD-SC Cat# 580523	2MD-SC 115V for semi-corrosive chemicals Magnetically driven pumps for semi-corrosive chemicals and solutions. The MD-SC Series features leak proof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polypropylene, ceramic and Buna-n® parts. Thermally protected open fan-cooled motor with sleeve bearings. 6 ft. power cord and 3-prong molded plug. HP 1/30 Flow 510 GPH @ 1' of Head Shut Off 14.6 Voltage 115 Hertz 50/60 Wt 6.25 lbs Dim: H 4.3" x W 4" x L8.5" Qty  Pump Little Giant 2MD-SC #580523 :$182.83
Model 3MD-SC Cat# 582503	3MD-SC 115V for semi-corrosive chemicals Magnetically driven pumps for semi-corrosive chemicals and solutions. The MD-SC Series features leak proof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polypropylene, ceramic and Buna-n® parts. Thermally protected open fan-cooled motor with ball bearings. 6 ft. power cord and 3-prong molded plug. (230V version has no plug). Specific Gravity - up to 1.1' Ambient Air Temperature - up to 77F (25C). Fluid Temperature – Up to 150F (66C). HP 1/12 Flow 750 @ 1' of Head Shut Off 21.9 Voltage 115 Hertz 50/60 Wt 8.5 lbs Dim: H 5" x W 4" x L 9.8" Qty  Pump Little Giant 3MD-SC #581503 :$203.15
Model 4MD-SC Cat# 582503	4MD-SC for semi-corrosive chemicals MD-SC Series Model 4-MD-SC Magnetically driven pumps for semi-corrosive chemicals and solutions. The MD-SC Series features leak proof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polypropylene, ceramic and Buna-n® parts. Thermally protected open fan-cooled permanent split capacitor motor with sleeve bearings. 6 ft. power cord and 3-prong molded plug. Specific Gravity - up to 1.1' Ambient Air Temperature - up to 77F (25C). Fluid Temperature – Up to 150F (66C). HP 1/10 Flow 850 @ 1' of Head Shut Off 24.3 Voltage 115 Hertz 50/60 Wt 9 lbs Dim:H 4.9" x W 5.5" x L 9.6" Qty  Pump Little Giant 4MD-SC #582503 :$289.86
Model 5MD-SC Cat# 583503	5MD-SC for semi-corrosive chemicals Magnetically driven pumps for semi-corrosive chemicals and solutions. The MD-SC Series features leak proof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polypropylene, ceramic and Buna-n® parts. Thermally protected, totally enclosed fan-cooled permanent split capacitor motor with sleeve bearings. 6 ft. power cord with 3-prong molded plug. (230V version has no plug). Specific Gravity - up to 1.1' Ambient Air Temperature - up to 77F (25C). Fluid Temperature – Up to 150F (66C). HP 1/8 Flow 1050 GPH @ 1' of Head Shut Off 27.5 Voltage 115 Hertz 50/60 Wt 9.25 lbs Dim:H 5.5" x W5.5" L8.7" Qty  Pump Little Giant 5MD-SC #583503 :$309.97
.Model PPS-12 Kit Cat# 555250	PPS-12 12VDC Kit Non-submersible, Self-Priming Water-Transfer Pump This lightweight, portable pump, with self-priming action can be used to empty waterbeds, drain water heaters or aquariums, pump out a basement, transfer water to an RV, pump boat bilges, pump out stock tanks, and in just about any other application where water needs to be transferred. Intermittent duty is 45 minutes on 15 minutes off. Kit includes: PP-12 pump which is dual threaded with both 3/8" FNPT and 3/4" GHT (Garden Hose Thread) intake and discharge and two 10' (3m) hoses with vacuum/screen (picks up water down to 1/8")attachment for inlet hose. Thermally protected. 12 VDC, 6' (2.0m) cord with battery clips Operates In-line only Maximum flow rate - 225 GPH @ 1', 851 LPH @ 30cm. Discharge - 3/4" (9.5 mm) FNPT & 3/4" (19 mm) garden hose thread Volute & Housing - Polypropylene Impeller & Shaft Seal - Buna-N Washes down boat decks Pumps out stock tanks Transfers water to campers Pumps boat bilges General farm and freshwater boating uses Intermittent Liquid Temp to - 120° F....49° C Operation - Manual, Intermittent Duty Wt 7.25lbs Dim: H4.75"xW13.5"xL13" Qty  Pump Little Giant PPS-12 Kit #555250:$118.85 Qty  Spare Replacement Impeller Kit for PPS-12 $25.00
Model PPS-1 kit Cat# 555150	PPS-1 115V Kit Non-Submersible Water-Transfer Pump This lightweight, portable pump, with self-priming action can be used to empty waterbeds, drain water heaters or aquariums, pump out a basement, transfer water to an RV, pump boat bilges, pump out stock tanks, and in just about any other application where water needs to be transferred. Intermittent duty is 45 minutes on 15 minutes off. Set includes PP-1 (see 555100) pump which is dual threaded with both 3/8" FNPT and 3/4" GHT (Garden Hose Thread) intake and discharge. Two 10' (3m) hoses with vacuum/screen attachment for inlet hose. Thermally protected. Motor - 1/10HP Maximum flow rate - 275 GPH @ 1', 1040 LPH @ 30cm. 115 VAC 6' power cord Intake & Discharge - 3/4" Male Garden Hose Threads Volute & Housing - Polypropylene Impeller - Buna-N Shaft Seal - Nitrile General water transfer Empties waterbeds Drains water heaters Pump operates In-line only Kit includes: two 10' sections of garden hose and a vacuum/screen attachment for use on inlet hose. Attachment allows water to be removed down to 1/8". Intermittent Liquid Temp to - 120° F....49° C Operation - Manual, Intermittent Duty Wt 8 lbs Dim:H 4.75" x W13.5" x L13" Qty  Pump Little Giant PPS-1 Kit #555150 :$116.45
Model 6KPH-SCkit Cat# 562660	GKPK-SC Coil Cleaning Kit A fast, inexpensive system for "boiling out" coils. The Little Giant Pump Company Coil Cleaning Kit is ideal for compressor burnouts when and where ordinary flush-outs cannot remove the glue-like residue. Use coil cleaning compounds compatible with materials of construction of the pump. Used with coil cleaning acids. Kit includes: 5 gal. polyethylene tank, cover, baffle, 2-MD-SC (Special Version #580523) magnet-driven pump with mounting bracket, 18" of 1/2" Tygon® tubing, and 10' of 1/2" ID vinyl tubing. 5 gallon polyethylene tank Cover Baffle 2-MD-SC chemical pump 18" 0f 1/2" vinyl tubing and 10' of 1/2" ID vinyl tubing Wt 11lbs Dim:H 8.6" x W 16" x L 20" Qty  Pump Little Giant 6KPH-SC kit #562660 :$298.98

Ratings stated are from manufacturer advertised specifications.

see Little Giant submersible pumps
see Little Giant condensation pumps
see Little Giant dual submersible and in-line pumps
see Little Giant chemical pumps
see Other Liquid Pumps
see Other Liquid Pumps
see Pump Accessories